ZH-WD-A Micro Drop Tester
This machine is suitable for repeated drop test of small electronic consumer products such as mobile phones, telephone handsets, walkie-talkies, MP3, CD, and electronic dictionaries.
I. Principle of action:
The lifting cylinder drives the upper clamp (pneumatic finger) to lower and clamp the mobile phone, and raises and releases the pneumatic finger, and the mobile phone moves freely. At this time, the double-action cylinder expands and pushes the mobile phone to the position where the upper clamp can be clamped, and the lifting cylinder drives the upper clamp. (Air finger) Clamp the phone down, raise it, release the air finger, the phone will fall freely, and repeat until the set number of times.
1.Can be set to stop automatically
2. Drop surface material: aluminum, thickness is 12mm.
3. Four reset cylinders are used at the drop.
4. Prompt function: It can set the number of times and can automatically stop the test.
5. The machine uses a rodless cylinder as the driving source for lifting and dropping the mobile phone, and is equipped with a precision double-acting cylinder for homing action, which is durable; it can achieve repeated drops of mobile phones and other products to detect the impact resistance of the product falling from a certain height;
6. Due to the use of pneumatic components and an authoritative control method, the test speed and consistency are greatly improved; the liquid crystal touch control screen + PLC programmable controller is used for program control; the two stations are counted independently and automatically stopped when the set number of times is reached test.
Third, the technical parameters <br /> Model number: ZH-WD-A
Number of stations: 1
Allowable test piece weight: 2kg (max)
Drop height: 0 ～ 150mm
Test speed range: 0 to 30 times / min
Touch screen control: 1 setDimensions: L420xH750xW450mm
Air source: ≥0.5Mpa
Power source: AC 220V